top of page

Chimney Relining

​

A flue lining in a masonry chimney is defined as "A clay, ceramic, or metal conduit installed inside of a chimney, intended to contain the combustion products, direct them to the outside atmosphere, and protect the chimney walls from heat and corrosion."

​Although building codes vary from one state or locality to another, the installation of flue lining has been recommended since the early part of this century, and indeed most fire codes now mandate liners.

In the 1940's and again in the 1980's, masonry chimneys were tested by the National Bureau or Standards for durability due to rising concerns about their performance and safety. The tests revealed that unlined chimneys were so unsafe that researchers characterized building a chimney without a liner as "little less than criminal".

 

Chimney liners serve three main functions:

  1. Protecting the house from heat transfer to combustibles. In the NBS tests, unlined chimneys allowed heat to move through the chimney so rapidly that the adjacent woodwork caught fire in only 3 1/2 hours.

  2. Protecting the masonry from the corrosive byproducts of combustion. In the tests it was determined that if the flue gases were allowed to penetrate to the brick and mortar, the result would be a reduction in the usable life of the chimney. The flue gases are acidic in nature and literally eat away at the mortar joints from inside the chimney. As the mortar joints erode, heat transfers more rapidly to the nearby combustibles and dangerous gases such as carbon monoxide can leak into the living areas of the home.

  3. Providing a correctly sized flue for optimum efficiency of appliances. Modern wood stoves and gas or oil furnaces require a correctly sized flue to perform properly. The chimney is responsible for not only allowing the products of combustion a passage out of the house, but the draft generated by the chimney also supplies the combustion air to the appliance. An incorrectly sized liner can lead to excessive creosote buildup in wood-burning stoves, and the production of carbon monoxide with conventional fuels.


Types of chimney liners:

  • Clay tiles are the most common type of masonry chimney liners.

    • Advantages: They are inexpensive, readily available, and perform quite well for open fireplace chimneys that are properly maintained.

    • Disadvantages:  They cannot rapidly absorb and evenly distribute heat during the rapid temperature rise that occurs during a chimney fire, causing the flue tiles to crack and split apart. The second disadvantage is that tiles cannot adequately contain the liquid combustion byproducts produced by modern gas appliances.​

​

  • Metal chimney liners, usually of stainless steel or aluminum, are primarily used to upgrade and repair existing chimneys.

    • Advantages:  If properly installed and maintained, metal chimney liners are extremely safe and durable. Stainless steel is suitable for wood-burning, gas, or oil appliances, while the aluminum is an inexpensive alternative for certain medium efficiency gas applications only. It is usually required that high temperature insulation be used in conjunction with the liners for safety and performance considerations.

    • Disadvantage: Considerably more expensive than clay flue liners.

    • ​​National Chimney offers a line of metal chimney liners that have been accepted by CSIA as safe for home use when properly installed. 

  • Cast-in-place chimney liners are lightweight, cement like products that are installed inside the chimney forming a smooth, seamless, insulated passageway for the flue gasses.

    • Advantage: They can improve the structural integrity of aging chimneys, and are permanent liners suitable for all fuels.

    • Disadvantage: Challenging installation and could be cost prohibitive.


Considering the dangers of old unlined or damaged chimneys, and the many cost effective options now available to make these chimneys safe components of the home heating system, we encourage you to have your chimney professionally inspected by a local CSIA Certified Chimney Sweep an an annual basis to be sure it meets modern safety standards.

Information provided by CSIA www.csia.org/chimney_liners.html

bottom of page